Print
This List
Email to
a Friend
How to Extend the Battery Life of Your Verizon Wireless Razr
HOW TO 
Tags: Razr, Verizon Wireless, Cell Phone Batteries, EVDO, 1X
If your cell phone continuously switches from EVDO to 1X than you could be using valuable battery life. Disabling EVDO can help to increase battery life and here is how you can do it.
| 1. | Open your phone. Press #0SETUP* or #073887* -- QUICKLY -- If you pause while typing #0SETUP* in, it may not work. Also note that that's a ZERO [0] not an OH [O] |
| 2. | "Enter Security Code:" should be on the screen - type 000000 which is SIX [6] ZERO's [000000] and then Pres the right soft-key which is the top-right button, closest to the screen. |
| 3. | Press the up on the keypad TWICE to scroll to Test Mode, otherwise just find test mode and then press select |
| 4. | Press down to highlight Enabled and then press the right soft-key that says Select. NOW! It will go back to the main "Programming Menu" which means that it that did indeed enable Test Mode. |
| 5. | Press End/Hang up once or twice to get back to the main screen. You should now see your wallpaper. Press the CLR button and then press the left soft-key -- QUICKLY -- You need to press CLR then LEFT SOFT-KEY quickly or it may not activate test mode. You should now see a white background with blue letters that say FTS. |
| 6. | Press the right soft-key key *3 TIMES* or until you see at the top "ServOpt: NoChg" - "AudioOpt: Auto" |
| 7. | Press the down key *8 TIMES* or until your see a > next to "HDR Pref: Auto" -- >HDR Pref: Auto |
| 8. | Press the right soft-key TWICE labeled CHANGE or until it says CDMA -- >HDR Pref: cdma |
| 9. | Press the left soft-key ONCE labeled EXIT and it will flash white real quick, then appear to be frozen... |
| 10. | Your phone is resetting. You will not be able to press for NEXT or PREV. You have to wait about 5-10 seconds until you CAN press the right or left soft-key for NEXT or PREV. The screens may cycle a couple different screens indicating that its ready. |
| 11. | Press the CLR button and then press the left soft-key -- QUICKLY -- You need to press CLR then LEFT SOFT-KEY quickly or it may not De-activate test mode. |
| 12. | EVDO is officially disabled and capable of being re-enabled. However, test mode is still running in the background and we need to turn it off. We will go back to the programming menu. |
| 13. | Press #0SETUP* or #073887* -- QUICKLY -- If you pause while typing #0SETUP* in, it may not work. |
| 14. | "Enter Security Code:" should be on the screen - type 000000 |
| 15. | Press the up on the keypad TWICE to scroll to Test Mode or find test mode and then press select |
| 16. | Make sure Disabled is highlighted and then press the right soft-key that says Select. NOW! It will go back to the main "Programming Menu" which means that it that did indeed disable Test Mode. |
| 17. | Press End or Left soft-key for exit and you're back to your regular \ phone without regular EVDO. Be sure to remember this process if you want to switch back. |
Lister:
ListAfterList Wiki Contributors
Other lists of interest:
This list not rated yet – be the first to rate it